As we all know, hollow board turnover boxes are used for logistics transportation or cargo handling. They are a type of transport tool produced at the time. Only by cleaning them properly can residual dirt be removed. Let's look at the correct way to clean hollow board turnover boxes:

First, place the hollow board turnover box to be cleaned into the cleaning chamber, then wipe it with a cloth and apply cleaning agent, cleaning the flat parts of the box from top to bottom and from the inside out. Next, clean the handles, bottom, and edges of the box. These small corners are easily overlooked, so remember not to forget to clean them. After all this is cleaned, rinse the box again with clean water from top to bottom and rinse off the foam.

When cleaning, do not use old clothes or coarse cloths. The surface of such cloths is rough and hard, which will damage the surface of the hollow board turnover box. Once damaged, the box cannot be protected. Use a soft cloth or towel to remove dust. Non-corrosive cleaning agents, such as soap and detergent, can be used to clean hollow board turnover boxes. Neutral cleaning agents are needed to clean hollow board turnover boxes in order to better clean the hollow parts and extend their service life.